Van Windows Direct - Shipping States

Installation Accessories

Van Window Installation Seals, Silicone, and accessories for an easy window installation
Sort By:  
CRL S50 Sprayway Glass Cleaner Single Can
CRL S50 Sprayway Glass Cleaner Single Can (S50)
  • A Glass Industry Favorite for Years
  • Ammonia-Free Formula
  • Fast Evaporation Rate, Just Spray and Wipe Clean
  • Single Can

Year after year, CRL S50 is Sprayway's leading Glass Cleaner is one of our most popular cleaners. The formula includes perfume-grade alcohols, which are the best cleaning agents you can use. It also has a fast evaporation rate, which keeps it from leaving a film and adversely interacting with other materials. Also available with your logo or private label.

CRL POWR Automotive Glass Cleaner Single Can PWR22
CRL POWR Automotive Glass Cleaner Single Can PWR22 (PWR22)
  • Formulated for Use with All Automotive Urethanes to Enhance Bonding of Urethane Adhesive
  • LYNX Approved
  • Removes Contamination and Release Agents
  • Cans Sold Each

CRL PWR22 Automotive Glass Cleaner has been tested by CRL labs to offer the same cleaning qualities as most automotive urethane glass conditioners. This allows you to use a glass cleaner as a prep for primer applications instead of the costly glass conditioners. Large 19 fluid ounce (539 grams) cans will provide you with some serious cost savings.

CRL General Purpose Solvent and Adhesive Cleaner CRL2032
CRL General Purpose Solvent and Adhesive Cleaner CRL2032 (CRL2032 )
  • Extra Strength for Removing Uncured Urethane Adhesive
  • The Perfect Clean-Up Companion to Urethane Users

CRL General Purpose Solvent and Adhesive Cleaner can handle some of the toughest cleaning jobs in your shop. Use it to soften and remove uncured urethane, adhesive, tar, grease, oil, body sealer, and undercoating. Apply to a rag and rub lightly over soiled areas, then wipe up with a clean, dry cloth.

CRL S50 Sprayway Glass Cleaner Case of 12
CRL S50 Sprayway Glass Cleaner Case of 12 (S50 CASE)
  • A Glass Industry Favorite for Years
  • Ammonia-Free Formula
  • Fast Evaporation Rate, Just Spray and Wipe Clean
  • Case of 12

Year after year, CRL S50 is Sprayway's leading Glass Cleaner is one of our most popular cleaners. The formula includes perfume-grade alcohols, which are the best cleaning agents you can use. It also has a fast evaporation rate, which keeps it from leaving a film and adversely interacting with other materials. Also available with your logo or private label.

CRL/Somaca POWR BOND Hi-Viscosity Urethane Adhesive
CRL/Somaca POWR BOND Hi-Viscosity Urethane Adhesive (1217349)
  • Easy Gunning
  • Meets or Exceeds U.S. Federal Motor Vehicle Safety Standards 208 and 212
  • Screw-On V-Cut Nozzles
  • Value Priced, Fast Curing, Cold Applied
  • Part of the LYNX Services Program

 

CRL/Somaca POWR BOND Hi-Viscosity Urethane Adhesive is a fast curing adhesive that passes or exceeds U.S. Federal Motor Vehicle Safety Standards FMVSS212 (Barrier Crash Test) and FMVSS208 (Occupant Crash Protection) in its most severe interpretation with dual air bags and unrestrained dummies. The fast curing formula is tack free in only 50 ±10 minutes and offers Safe Drive Away Time in as little as 1-1/2 hours when used on vehicles without a passenger side air bag, 3 hours with passenger air bag at 73°F (23°C) and 45% RH (relative humidity).

CRL POWR 300 Series Automotive Urethane Pinchweld Primer PP3MP
CRL POWR 300 Series Automotive Urethane Pinchweld Primer PP3MP (PP3MP)
  • Primerless to Auto Glass Frit
  • Apply to Repainted Pinchwelds
  • Enhances Bond

 

CRL POWR 300 Series Urethane Pinchweld Primer is formulated for enhancing the bonding of urethane to bare metal or paint. Use to touch up any scratches, repaired rust areas or repainted pinchwelds. Not to be applied on top of old urethane.

 

Preparation
Prior to beginning make sure you have the correct glass and moldings, as required, and all the tools and supplies
you will need for the vehicle being serviced. Make sure the urethane system being used is current.
Inspect the area where the service work will be conducted and make sure it is free from obstacles that would create
safety concerns, is well lit and that the ambient temperature is in keeping with the limits of the urethane system
being used.
Pre-Inspection
Inspect the car; closely inspect the area of the vehicle you will be working on for existing damage. Using the CRL
Inspection Checklist (Appendix “A”) make a note of pre-existing damage. If the customer is there, show the damage
to the customer and note the location. Do not engage in automotive glass replacement when any related condition
would compromise the retention system and notify the owner/operator.
Post-Inspection
After installation of the replacement glass do a post inspection; using the CRL Inspection Checklist (Appendix “A”)
make note that the service work and paperwork is complete and correct. Clean the vehicle and the work area and
inspect the area for any new damage to the vehicle or glass.
Cover the front seats, floorboards, dashboard and steering wheel with a clean drop cloth or disposable plastic
covers. Cover the hood, roof, and fender with a protective material to protect against possible damage to the
vehicle. Tape up any vulnerable areas on the vehicle to protect against possible damage from power tools and
cold knifes during the cutout process.
Safety
Always wear personal protection equipment:
• Wear proper eye protection
• Wear powder free Nitrile, chemical-resistant gloves
• Additional safety equipment as required by your employer or safety regulations
Make sure all electrical equipment is properly grounded and in proper working condition to protect you from electrical
shock.
Quality Conformance
All POWR Primerless products are produced under strict, documented quality assurance standards that are
registered to ISO/TS-16949. Furthermore, performance characteristics of all POWR Primerless urethane adhesives
meet or exceed criteria established by Original Equipment Manufacturer’s (OEM’s) and Federal Motor

CRL Hi-SHEEN Glass Cleaner Single Can 3371100
CRL Hi-SHEEN Glass Cleaner Single Can 3371100 (3371100-)
  • Industrial Strength Cleaner
  • Won't Leave Streaks, Blurs, or Rainbows
  • Our Most Popular Aerosol Glass Cleaner
  • Quality Products for Any Application or Preference
  • Low-Ammoniated Formula
  • Single Can

This CRL/Somaca Hi-SHEEN® Glass Cleaner is specially formulated to dissolve the toughest problems a professional will face: Dirt, fingerprints, grime, grease, salts, saps and smudges. Hi-SHEEN® lifts residues from non-porous surfaces. It will not run when applying, or evaporate quickly like many other cleaners on the market. And it won’t leave streaks, blurs, or rainbows.

CRL 3371100
CRL Hi-SHEEN Glass Cleaner Case of 12 3371100 (3371100)
  • Industrial Strength Cleaner
  • Won't Leave Streaks, Blurs, or Rainbows
  • Our Most Popular Aerosol Glass Cleaner
  • Quality Products for Any Application or Preference
  • Low-Ammoniated Formula
  • Case of 12

This CRL/Somaca Hi-SHEEN® Glass Cleaner is specially formulated to dissolve the toughest problems a professional will face: Dirt, fingerprints, grime, grease, salts, saps and smudges. Hi-SHEEN® lifts residues from non-porous surfaces. It will not run when applying, or evaporate quickly like many other cleaners on the market. And it won’t leave streaks, blurs, or rainbows.

CRL 60701
Van Window Installation Seal 60701 (VW60701FS)

This Van Window Foam Seal Tape is a closed cell silicone base, automotive grade weather seal material. This Foam Seal Tape has excellent memory, and will keep drafts and water out of your Van for years to come. 1/2" x 1/4" x 50'

Per Page      1 - 9 of 9
  • 1

Van Windows Direct

Van Windows Direct is a website dedicated to Aftermarket Van Windows. Whether you have an existing Window that has been broken or you want to add windows to your Cargo Van we can help. We only carry the highest quality aftermarket Windows from top line manufactures. We carry direct fit, Custom and Universal Van Windows.

When replacing Windows the absolute best measurements to take are the hole size measurements. Though this is the most difficult it insure that you get the correct window that will work for you. The reason to take the cut hole measurement is over the last 3 decades there have been numerous manufactures of Van Windows that have come and gone, many making their own sizes. Some used thin frames while others used thick frames. That's what throw off out side measurements. If there is a 1/2" difference in the thickness of the frame that will be a full 1" difference in the size of the window. So when you go by the hole size there is no discrepancy.

Modern Vans such as Ram ProMaster , Sprinter Van, Ford Transit and Transit Connect and the Nissan NV , NV200 Series of Vans are only available in the modern All Glass Style Window, this is where the exterior of the window appears to be a frame-less all glass window. While if you have have Chevy, GMC Express or Savana, Ford Econoline or Dodge Ram Van you have the choice of the All Glass look or the Traditional Window which had the exterior exposed black powder-coated frame. We also carry specialty Windows for Trailers, RV, Campers and the Classic Round and Parallelogram Port Hole Windows. You can purchase rubber seals, silicone, and tools for installation from VanWindowsDirect.com as well.

We are the Internets best choice in Van Windows with an Expert Staff to answer all your questions, 100% Free Shipping anywhere in the Continental USA, shipping from 18 Warehouses across the US for speedy safe delivery. We may have a window transferred on private company truck from one warehouse to another before handing off to common carriers, the reason for this is to minimize the time/mileage that a UPS has the window reducing damages and insuring you get a window you can use the first delivery. Also if your in Southern California the Inland Empire we can offer Local Installation. Call us 858-800-4795.

If your looking for quality Truck Accessories or Van Accessories look to TrucknVans.com