CRL

CRL VW40161 40% Side Hinged Cargo Door Window Ford Econoline Van 92-18

  • Sale
  • $155.95
  • Regular price $199.99


CRL Fixed 40% Window - Passenger Side Hinged Door 1992-2018 Ford Econoline Vans 14-3/4" x 21-1/4" VW40161

Part # VW40161
MFG: CR Laurence (CRL)

 

All Models

Position
Passenger Side Cargo 40% Door   CRL Fixed 40% Window - Passenger Side Hinged Door 1992-2018 Ford Econoline Vans 14-3/4" x 21-1/4" VW40161  Part # VW40161 MFG: CR Laurence (CRL)            
 Description
  • Dark Solar Privacy Glass
  • Black Powder-Coated Frame


CRL Bay Windows classic style window with Dark Solar Privacy Glass and exposed black aluminum frame. Window is not intended to replace a factory window.

 

Outside Frame Dimensions: 14-3/4" (375 mm) x 21-1/4" (540 mm)
Cut Out Dimensions: 14" (356 mm) x 20-1/2" (521 mm)
Clamp Ring/Angles: 1/8" (3 mm) - Rectangular 90°/90°

Whats needed to Install?

 Van Window Installation Foam Seal

How will I install this window?

 To install the FW/VW Series of windows you will need to create a template. To make a template you can either use the aluminum framing on the backside of the window or the clamp ring we will have illustrations on using the clamp ring. Be sure to use the edge of the clamp ringthat matches to the aluminum frame edge of the window (the aluminum frame that goes through the wall). 

Make sure that the clamp ring is taped shut as it has an opening. 

Van Window Template to install van windows

 You will then trace you template onto the cardboard box sharpie, black marker ,etc.. you do not want to have to thick of a marker as you want to try and be as precise as possible. 

Template Van Window Installation

After you have draw out the pattern on the cardboard it is time to cut the pattern from the cardboard. 

Cutting out Van Windows - Van Window Installation Steps  Removing van window template

 

 

Once you template is created clean up any little rough edges and we are ready to place on your van. You will want to measure out for placement to insure you have your template where you want it to be. To hold template in place you can put screws through cardboard to hold, have a partner hold or use tape. In our photo we used tape. Be sure to tape the template in place on the straight areas so those are easy to draw in your line later.

 

Van Window Template Installation Process

Draw your template onto the wall of the van. 

 

Draw template for van window installation

 

Once you have drawn your pattern onto the wall of the van and are happy with the placement your ready to cut. Reciprocating saw, skill saw, disc, nibbler,shears, etc... 

 

Once your hole is done dry fit the window to make sure window fits into hole no adjustments or extra trimming are needed. If your good you can add clear coat or paint to the cut edge its not necessary just a precaution. 

 

If you window is good to go you will attach the van window installation foam to the back side of your window

Van Window Installation Seal

 

Now time to install the window. Before putting the window on the van its best to go through make a small pilot hole in all the locations around the trim ring that way you do not round the heads of the screws when tightening the window. 

Put Window in place from outside of Van allowing the aluminum mounting frame to extend through hole in wall. Place clamp ring from inside most vans will have the split on the bottom. With one person holding window in place on the outside the other can start to screw from the inside generally start with the two at the split in the trim ring to have that lined up then top and around you do not want to fully tighten once all screws are in place, you can then go back around and tighten them be sure to tighten evenly around for proper seal. 

 

 Lead Time:
 Windows will generally ship in 1-3 Days , shipping time is 1-5 days. Windows will ship via UPS,Fedex , or Freight Truck.