CRL Universal Vertical Lift Van Window 17-15/16" x 21-9/16" with 1/8" Trim Ring VW31031
**Back Order - Estimated Shipping April 2021*
Part # VW31031
Mfg: CR Laurence (CRL)
MFG Country: USA
Warranty: 30 Days
Glass Color = Solar Privacy Glass
Glass UV Rating = 28%
The CRL Vertical Lift Window features a dark solar privacy glass. The window is framed in a black powder-coated aluminum. The lower panel slides up allowing ample ventilation and the built in screens keeps bugs and debris out.
This window has become extremely popular on the Sprinter Van, Transit Van and ProMaster Van for the Rear Cargo Doors as the 17-15/16" x 21-9/16" size fits the doors and allows for a ventilated window to be installed where all the custom options are solid glass.
As always with universal windows check the sizes below to insure it will work for your van and the position you are wanting it to be installed.
Outside Frame Dimensions: 17-15/16" (455 mm) x 21-9/16" (548 mm)
Cut Out Dimensions: 16-11/16" (424 mm) x 20-5/16" (516 mm)
Clamp Ring/Angles: 1/8" (3 mm) - Rectangular 90°/90°
Vent Opening Size: 15-3/4"W x 5" H
|Whats needed to Install?|
|How will I install this window?|
You will need to create a template to cut your window hole. Easiest way is to use the cardboard box it came with lay vertical window on it glass side (outside) up. Or use the trim ring utizing the inner opening thatmatches to the aluminum frame edge of the window to draw out the template.When drawing template to Van if there are two people great one can hold while the other draws it out. If your installing solo once you know the spot you will be placing the window you can screw the cardboard into the side wall to hold in place then draw your pattern.
The CRL Window utilizes a trim ring (clamp ring) installation. Before putting the window on the van its best to go through make a small pilot hole in all the locations around the trim ring that way you do not round the heads of the screws when tightening the window.
Tape you window installation foam on the backside of your windows aluminum frame so it will get sandwiched between frame of the window and the body of your van.
Put Window in place from outside of Van allowing the aluminum mounting frame to extend through hole in wall. Place clamp ring from inside most vans will have the split on the bottom. With one person holding window in place on the outside the other can start a the screws from the inside generally start with the two at the split in the trim ring to have that lined up then top and around you do not want to fully tighten once all screws are in place, you can then go back around and tighten them be sure to tighten evenly around for proper seal.
|Windows will generally ship in 1-3 Days , shipping time is 1-5 days. Windows will ship via UPS,Fedex , or Freight Truck.|