CRL

Driver Side Forward Egress Window RAM ProMaster Van 14-18

  • Sale
  • $459.95
  • Regular price $699.99


CRL FW382LE Driver Side Egress Emergency Exit Window RAM ProMaster Van 1336", 159", 159" Extended Wheelbase 2014-2018

 

136" and 159" Wheel Base (Also 159" Extended)

Position
Driver Side Forward  CRL FW392L Driver Side Forward T-Vent Van Window RAM ProMaster
 Description
CRL EGRESS Windows are a popular option for commuter and commercial transit ProMaster Vans. These Emergency Exit Windows have become mandatory in many states. These Egress Windows meet FMVSS Standards while providing  unmatched performance and a modern design. CRL EGRESS Pro Master Windows have been precision-engineered to match the RAM Van OEM body styles and window openings while providing increased safety features and a modern looks.
Whats needed to Install?

 No additional products are required for installation.

How will I install this window?

 The ProMaster Van Window utilizes the factory metal stamping, on the interior of the van you will notice an area where the inner metal ends. Here is a photo to clarify. You will cut right along that edge all the way around your van may have multiple upright you will cut those out straight with your opening.

 OEM Stamping Cut out RAM Promaster Van, How to cut window Pro Master Van

 

If you are replacing an existing factory window that glued in you may want to take to a professional for removal and replacement. Best tool to use is a wire cutter  Equalizer Window Cut-Out Set . Once the window is cut out you will need to cut the original urethane down as flat as possible and clean as much away as you can CRL Adhesive Cleaner  . 

Once the Hole has been cut out or window removed its time to install the new window. 

The CRL Window utilizes a trim ring (clamp ring) installation. Before putting the window on the van its best to go through make a small pilot hole in all the locations around the trim ring that way you do not round the heads of the screws when tightening the window. 

Put Window in place from outside of Van allowing the aluminum mounting frame to extend through hole in wall. Place clamp ring from inside most vans will have the split on the bottom. With one person holding window in place on the outside the other can start a the screws from the inside generally start with the two at the split in the trim ring to have that lined up then top and around you do not want to fully tighten once all screws are in place, you can then go back around and tighten them be sure to tighten evenly around for proper seal. 

 

 Lead Time:
 Windows will generally ship in 1-3 Days , shipping time is 1-5 days. Windows will ship via UPS,Fedex , or Freight Truck.